Management of periapical lesion with persistent exsudate.

This case describes the treatment and follow-up of a mandibular molar in an 18-year-old female with a periapical cyst. Thus, it becomes important to know which options should we take when faced with a clinical situation that we cannot resolve through conventional methods, and which techniques and approaches we have to achieve treatment success. This case showed the treatment plan and follow-up, by the use of CBCT images, from a previously treated mandibular molar with a large periapical abscess and cystic lesion, in which, the first treatment plan approach was to make the endodontic retreatment. During the chemo-mechanical preparation the presence of permanent intracanal purulent exudate made it impossible to dry the canals, impeding obturation of the root canal system. Due to this clinical situation, a surgical approach was performed with the intention of reduce this permanent exudate and to execute a decompression technique. Clinical findings, periapical radiographs and cone beam computed tomographic, indicated almost complete resolution of the radiolucency, after a one-year follow-up.

Este relato de caso descreve o tratamento e acompanhamento de um molar inferior em uma jovem de 18 anos com cisto periapical. Assim, torna-se importante saber quais opções devemos tomar diante de uma situação clínica que não podemos resolver pelos métodos convencionais, e quais técnicas e abordagens temos para alcançar o sucesso do tratamento. Este caso mostrou o plano de tratamento e acompanhamento, por meio de imagens de tomografia computadorizada de feixe cônico (TCFC), de um molar inferior previamente tratado com grande abscesso periapical e lesão cística, no qual, a primeira abordagem do plano de tratamento foi fazer o retratamento endodôntico. Durante o preparo químico-mecânico a presença de exsudato purulento intracanal permanente impossibilitou a secagem dos canais, impedindo a obturação do sistema de canais radiculares. Devido a essa situação clínica, foi realizada abordagem cirúrgica com a intenção de reduzir esse exsudato permanente e executar uma técnica de descompressão. Após um ano de acompanhamento, os achados clínicos e radiográficos indicaram processo de reparo.

Management of periapical lesion with persistent exsudate

Resumo Este relato de caso descreve o tratamento e acompanhamento de um molar inferior em uma jovem de 18 anos com cisto periapical. Assim, torna-se importante saber quais opções devemos tomar diante de uma situação clínica que não podemos resolver pelos métodos convencionais, e quais técnicas e abordagens temos para alcançar o sucesso do tratamento. Este caso mostrou o plano de tratamento e acompanhamento, por meio de imagens de tomografia computadorizada de feixe cônico (TCFC), de um molar inferior previamente tratado com grande abscesso periapical e lesão cística, no qual, a primeira abordagem do plano de tratamento foi fazer o retratamento endodôntico. Durante o preparo químico-mecânico a presença de exsudato purulento intracanal permanente impossibilitou a secagem dos canais, impedindo a obturação do sistema de canais radiculares. Devido a essa situação clínica, foi realizada abordagem cirúrgica com a intenção de reduzir esse exsudato permanente e executar uma técnica de descompressão. Após um ano de acompanhamento, os achados clínicos e radiográficos indicaram processo de reparo.

Abstract This case describes the treatment and follow-up of a mandibular molar in an 18-year-old female with a periapical cyst. Thus, it becomes important to know which options should we take when faced with a clinical situation that we cannot resolve through conventional methods, and which techniques and approaches we have to achieve treatment success. This case showed the treatment plan and follow-up, by the use of CBCT images, from a previously treated mandibular molar with a large periapical abscess and cystic lesion, in which, the first treatment plan approach was to make the endodontic retreatment. During the chemo-mechanical preparation the presence of permanent intracanal purulent exudate made it impossible to dry the canals, impeding obturation of the root canal system. Due to this clinical situation, a surgical approach was performed with the intention of reduce this permanent exudate and to execute a decompression technique. Clinical findings, periapical radiographs and cone beam computed tomographic, indicated almost complete resolution of the radiolucency, after a one-year follow-up.

Temperature changes affect the rheological properties of a silicone-based and an epoxy resin-based root canal sealers.

To evaluate temperature changes on the rheological properties (setting time and complex viscosity (η*)) of GuttaFlow Bioseal (GFB) and AH Plus Jet (AHPJ). Rheological measurements were performed in oscillating mode at the strain amplitude and angular frequency of 0.01% and 10 rad s-1 , respectively. Each sealer (n = 5) was tested running a temperature ramp (rapid increase to 80°C, 1 min constantly at 80°C, and slower decrease to 37°C). Control groups (n = 5) were tested at a constant temperature of 37°C. Kolmogorov-Smirnov and one-way ANOVA (P < 0.05) statistical tests were performed. The temperature ramp reduced setting time of GFB (24.85 to 4.45 min) (P < 0.05), but did not alter that of AHPJ (P > 0.05). GFB exhibited an increased η*, whereas the AHPJ η* was decreased when heated (P < 0.05). Rheological properties of sealers were negatively affected by temperature changes.

Micro-computed tomographic assessment of the variability and morphological features of root canal system and their ramifications.

OBJECTIVES: This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (µCT). METHODOLOGY: 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by µCT with a resolution of 26.70 µm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). RESULTS: According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). CONCLUSIONS: µCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This µCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

Micro-computed tomographic assessment of the variability and morphological features of root canal system and their ramifications

Abstract Objectives This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (μCT). Methodology 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by μCT with a resolution of 26.70 μm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). Results According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). Conclusions μCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This μCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

In vitro evaluation of tooth discoloration induced by regenerative endodontic therapy and the effectiveness of the walking bleach technique.

BACKGROUND: The present study evaluated the coronal discoloration induced by different materials or blood as well as the effect of internal bleaching on discoloration. METHODS: After tooth color measurement at baseline with a sphere spectrophotometer (CIE L*a*b*), the root canals of molars were partially filled with white mineral trioxide aggregate (MTA), triple antibiotic paste (TAP), or a cotton pellet with bovine blood (control) was placed into the pulp chamber. The color changes were assessed at 30, 60, and 180 days after the procedure. Following the discoloration, internal bleaching was performed with a mixture of sodium perborate and hydrogen peroxide inserted into the pulp chamber, and this mixture was replaced weekly for 3 weeks. At baseline, after staining and after bleaching, the data of each color parameter were individually analyzed by one-way ANOVA, while differences in pooled color changes (∆E00) were assessed by two-way repeated measures ANOVA (α = 0.05). RESULTS: After the staining period, the TAP-stained specimens were darker and greener than the other specimens, and no difference was observed between the teeth stained with blood and those stained with MTA. The walking bleach technique resulted in an improved tooth color without a difference in the color changes among the different groups. CONCLUSION: The TAP-stained specimens had the greatest tooth discoloration, and the discoloration remained the highest after the walking bleach technique. PRACTICAL IMPLICATIONS: This in vitro study demonstrated that TAP yielded higher tooth discoloration, and this color might hinder a satisfactory tooth color from being obtained with the walking bleach technique.

Changes in Geometry and Transportation of Root Canals with Severe Curvature Prepared by Different Heat-treated Nickel-titanium Instruments: A Micro-computed Tomographic Study.

INTRODUCTION: The aim of this study was to compare the shaping ability of 4 different nickel-titanium systems, considering their variation in alloy treatment, kinematics, and design, used to prepare canals with severe curvature using micro-computed tomographic analysis. METHODS: Thirty-two mesial roots of mandibular molars with severe curvature were matched based on similar morphologic dimensions and assigned to 4 experimental groups (n = 8) according to the canal preparation: ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), Reciproc (RC; VDW GmbH, Munich, Germany), Reciproc Blue (RCB, VDW GmbH), and TRUShape (TRU; Dentsply Tulsa Dental Specialties, Tulsa, OK) systems. Changes in 2-dimensional (area and perimeter) and 3-dimensional (volume, surface area, and structure model index) morphologic parameters as well as canal transportation were compared among groups using the analysis of variance post hoc Tukey tests with the significance level set at 5%. RESULTS: Preparation significantly increased all analyzed parameters. No statistically significant differences (P > .05) were observed between RC and RCB or between PTN and TRS in any of the analyzed parameters. In the cervical third, RC and RCB presented higher mean increases than PTN and TRU. In the apical third, there were no statistically significant differences (P > .05) among the systems. CONCLUSIONS: The instruments of greater taper may promote greater morphologic changes. However, regardless of the number of instruments (multiple or single), the type of movement (rotation or reciprocating), the type of heat treatment of alloys, and the particular characteristics of each instrument (taper and design), the evaluated systems did not result in different dimensional changes and canal transportation in the critical apical area.

Genetic Polymorphisms in RANK and RANKL are Associated with Persistent Apical Periodontitis.

INTRODUCTION: The outcome of root canal treatment has been reported as intimately related to the host response. Genetic polymorphisms might be associated with apical periodontitis repair. The aim of this study was to evaluate the association between receptor activator of nuclear factor kappa B (RANK), receptor activator of nuclear factor kappa B ligand (RANKL), and osteoprotegerin (OPG) genetic polymorphisms with persistent apical periodontitis (PAP) in Brazilian subjects. METHODS: Subjects with at least 1 year of follow-up after nonsurgical root canal therapy were recalled. Sixty-four subjects with signs/symptoms of PAP and 86 subjects with root canal-treated teeth exhibiting healthy periradicular tissues (healed) were included. Genomic DNA was extracted from saliva and used for RANK (rs3826620), RANKL (rs9594738), and OPG (rs2073618) genotyping by real-time exact tests, and odds ratio were implemented using Epi Info 3.5.2 (Centers for Disease Control and Prevention, Atlanta, GA). A logistic regression analysis was also performed using the time of follow-up as the covariate. All tests were performed with an established alpha of 0.05 (P = .05). RESULTS: An association between allele distribution and the polymorphism in RANK was observed. Subjects who carry the T allele had a lower risk of having PAP (P < .05). In RANKL polymorphism, the genotype distribution was statistically significant different between the PAP and healed groups (P = .05). The time of follow-up was associated with PAP (P < .05). In the logistic regression analysis using time as a covariant, RANK (P < .05) and RANKL (P < .05) were associated with PAP. The polymorphism rs2073618 in OPG was not associated with PAP (P > .05). CONCLUSIONS: These findings suggest that polymorphisms in RANK and RANKL genes are associated with PAP.

Are the bite force and electromyographic activity altered in muscle TMD patients with abfraction lesions?

OBJECTIVE: To verify if the maximal molar bite force (BF) and the electromyographic activity (EMG) are altered in TMD patients with abfraction lesions (AL) when compared to those without AL. METHODS: The sample was composed of 45 patients (18-60 years old), 30 diagnosed with TMD (RDC/TMD) (15 with AL and 15 without AL) and 15 controls. The BF and the EMG of the masticatory muscles (maximal voluntary contraction (MVC) and chewing gum) were measured. RESULTS: TMD patients showed decreased BF (p < 0.001), without differences between patients with and without AL. The electromyographic activity during MVC was similar among all groups (p > 0.05), although there was a greater trend of muscular balance for the control group (percentage overlapping coefficient and electromyographic indexes). The TMD group without AL showed a lower number of cycles and masticatory frequency. DISCUSSION: TMD patients with and without AL exhibited similar results in the analysis of the BF and EMG, without differences.

How to improve root canal filling in teeth subjected to radiation therapy for cancer.

The aim of this study was to evaluate the influence of radiation therapy on root canal sealer push-out bond strength (BS) to dentin and the sealer/dentin interface after different final irrigation solutions (NaOCl, EDTA, and chitosan). Sixty-four maxillary canines were distributed into two groups (n=30): non-irradiated and irradiated with 60 Gy. Canals were prepared with Reciproc-R50 and subdivided (n=10) for final irrigation (NaOCl, EDTA, chitosan) and filled. Three dentin slices were obtained from each root third. The first slice of each third was selected for BS evaluation, and the failure mode was determined by stereomicroscopy. SEM analysis of the sealer-dentin interface was performed in the remaining slices. Two-way ANOVA and Tukey's tests (α=0.05) were used. Lower BS (P<0.0001) was obtained after irradiation (2.07±0.79 MPa), regardless of the final irrigation solution used. The NaOCl group (P<0.001) had the lowest BS in the irradiated (1.68±0.72) and non-irradiated (2.39±0.89) groups, whereas the EDTA (irradiated: 2.14±0.77 and non-irradiated: 3.92±1.54) and chitosan (irradiated: 2.37±0.73 and non-irradiated: 3.51±1.47) groups demonstrated a higher BS (P<0.05). The highest values were observed in the coronal third (3.17±1.38) when compared to the middle (2.74±1.36) and apical ones (2.09±0.97)(P<0.0001). There were more cohesive failures and more gaps in irradiated specimens, regardless of the final solution. The present study showed that radiation was associated with a decrease in BS, regardless of the final solution used, whereas chitosan increased BS in teeth subjected to radiation therapy.

Root canal preparation using micro-computed tomography analysis: a literature review.

This literature review has critically analyzed the published research related to the biomechanical preparation of root canals with three-dimensional analysis using micro-computed tomography (micro-CT). In December 2017, six databases (PubMed, Cochrane, Web of Science, Embase, Scopus, and Science Direct) were accessed using keywords to find articles including the use of the micro-CT analysis in biomechanical root canal preparation. There were 60 full articles that were selected, which were screened and read by two authors. The research that was reviewed and analyzed included root canal anatomy and sample selection, changes in canal shape and untouched canal areas, canal transportation and centering ability, and kinematics (motion). Of the studies selected, 49.18% discussed anatomical characteristics, with 54.1% of these studies describing mesial roots of mandibular molars with moderate curvature. Only 35% used a stratified distribution based on root canal system morphology and quantitative data obtained by micro-CT. The analysis of canal transportation and centering ability showed that transport values in the apical third exceeded the critical limit of 0.3 mm in mesial roots of mandibular molars with moderate curvature, especially in the groups in which a reciprocating system was used. In relation to kinematics, 91.70% of the reviewed studies evaluated continuous rotating instruments, followed by reciprocating rotation (38.33%), vibratory (15%), and the adaptive kinematics, which was in only 8.33%. The reciprocating kinematics was associated with higher canal decentralization and transportation indexes, as well as a greater capacity for dentin removal and debris accumulation. This literature review showed that the anatomy, the type of design and kinematics of instruments, and the experimental design are factors that directly influence the quality of biomechanical preparation of root canals analyzed in a qualitative and quantitative manner by micro-CT.

CAD/CAM diamond tool wear.

OBJECTIVE: This study evaluated the wear of computer-aided design/computer-assisted manufacture (CAD/CAM) burs and the morphologic changes after a number of millings. METHOD AND MATERIALS: Diamond burs (cylinder and step-bur) were divided into four milling groups: zero millings (G0); 15 millings (G1); 25 millings (G2); and 35 millings (G3). Seventy-five premolar crowns were milled using the Cerec Compact Milling unit and VitaBlock Mark II. Surface roughness, three-dimensional profile, and SEM were used for wear and surface damage evaluation. RESULTS: Two-way ANOVA and Tukey test (α = .05) showed that G3 produced statistically different values compared to G0 and G2, but not G1. The cylinder burs showed higher roughness values than step-burs for all groups. SEM showed similar diamond particle damage for cylinder burs and step-burs, and signs of surface damage, cracks, and particle losses for G3. CONCLUSION: Both cylinder burs and step-burs were able to sustain a larger number of milling procedures than indicated by the manufacturer.

Effectiveness of different final irrigation techniques and placement of endodontic sealer into dentinal tubules.

The aim of this study was to compare two irrigation techniques and four devices for endodontic sealer placement into the dentinal tubules. Ninety-nine single-rooted human teeth were instrumented and allocated to either the control (CO) (n=11) or experimental groups according to the irrigation method: syringe and NaveTip needle (NT) (n=44), and EndoActivator (EA) (n=44). These groups were subdivided according to sealer placement into K-File (KF), lentulo spiral (LS), Easy Clean (EC), and EndoActivator (EA) subgroups. Moreover, the distances of 5 mm and 2 mm from the apex were analyzed. The teeth were obturated with AH Plus and GuttaCore X3. Analyses were performed by scanning electron microscopy associated to cathodoluminescence. The percentage and maximum depth of sealer penetration were measured. Data were evaluated by three-way analysis of variance (ANOVA) and Games-Howell test (p<0.05). EA was superior to NT in percentage of sealer penetration. EC was significantly superior to EA (subgroup) for sealer penetration, and both improved the percentage of sealer penetration when compared to LS. Better sealer penetration was observed at the distance of 5 mm from the apex. Sealer penetration into the dentinal tubules was significantly improved by sonic irrigant activation.

Micro-CT Evaluation of Root and Canal Morphology of Mandibular First Premolars with Radicular Grooves.

The aim of this study was to evaluate morphological features of 70 single-rooted mandibular first premolars with radicular grooves (RG) using micro-CT technology. Teeth were scanned and evaluated regarding the morphology of the roots and root canals as well as length, depth and percentage frequency location of the RG. Volume, surface area and Structure Model Index (SMI) of the canals were measured for the full root length. Two-dimensional parameters and frequency of canal orifices were evaluated at 1, 2, and 3 mm levels from the apical foramen. The number of accessory canals, the dentinal thickness, and cross-sectional appearance of the canal at different root levels were also recorded. Expression of deep grooves was observed in 21.42% of the sample. Mean lengths of root and RG were 13.43 mm and 8.5 mm, respectively, while depth of the RG ranged from 0.75 to 1.13 mm. Mean canal volume, surface area and SMI were 10.78 mm3, 58.51 mm2, and 2.84, respectively. Apical delta was present in 4.35% of the sample and accessory canals were observed mostly at the middle and apical thirds. Two-dimensional parameters indicated an oval-shaped cross-sectional appearance of the root canal with a high percentage frequency of canal divisions (87.15%). Canal configuration type V (58.57%) was the most prevalent. C-shaped configuration was observed in 13 premolars (18.57%), whereas dentinal thickness ranged from 1.0 to 1.31 mm. Radicular grooves in mandibular first premolars was associated with the occurrence of several anatomical complexities, including C-shaped canals and divisions of the main root canal.

Effect of different diode laser wavelengths on root dentin decontamination infected with Enterococcus faecalis.

The objective of this study was to evaluate the antibacterial effect and the ultrastructural alterations of diode laser with different wavelengths (808nm and 970nm) and its association with irrigating solutions (2.5% sodium hypochlorite and 2% chlorhexidine) in root dentin contaminated by a five days biofilm. Thirteen uniradicular teeth were sectioned into 100 dentin intraradicular blocks. Initially, the blocks were immersed for 5min in 17% EDTA and washed with distilled water for 5min, then samples were sterilized for 30min at 120°C. The dentin samples were inoculated with 0.1mL of E. faecalis suspension in 5mL BHI (Brain Heart Infusion) and incubated at 37°C for 5days. After contamination, the specimens were distributed into ten groups (n=10) according to surface treatment: GI - 5mL NaOCl 2.5%, GII - 5mL NaOCl 2.5%+808nm diode (0.1W for 20s), GIII - 5mL NaOCl 2.5%+970nm diode (0.5W for 4s), GIV - 808nm diode (0.1W for 20s), GV - 970nm diode (0.5W for 4s), GVI - CHX 2%, GVII - CHX 2%+808nm diode (0.1W for 20s), GVIII - CHX 2%+970nm diode (0.5W for 4s), GIX - positive control and GX - negative control. Bacterial growth was analyzed by turbidity and optical density of the growth medium by spectrophotometry (nm). Then, the specimens were processed for analysis ultrastructural changes of the dentin surface by SEM. The data was subject to the One-way ANOVA test. GI (77.5±12.1), GII (72.5±12.2), GIII (68.7±8.7), GV (68.3±8.7), GVI (62.0±5.5) and GVII (67.5±3.3) were statistically similar and statistically different from GIV (58.8±25.0), GVIII (59.2±4.0) and control groups (p<0.05). SEM analysis showed a modified amorphous organic matrix layer with melted intertubular dentin when dentin samples were irradiated with 970nm diode laser; erosion of the intertubular dentin in blocks submitted to 808nm diode laser irradiation; and an increased erosion of the intertubular dentin when 2.5% NaOCl was associated to the different wavelengths lasers. All the therapeutic protocols were able to reduce the bacterial contingent in dentin blocks, and the association of diode laser and solutions did not significantly improve the reduction of the bacterial contingent.

Micro-CT Evaluation of Root and Canal Morphology of Mandibular First Premolars with Radicular Grooves

Abstract The aim of this study was to evaluate morphological features of 70 single-rooted mandibular first premolars with radicular grooves (RG) using micro-CT technology. Teeth were scanned and evaluated regarding the morphology of the roots and root canals as well as length, depth and percentage frequency location of the RG. Volume, surface area and Structure Model Index (SMI) of the canals were measured for the full root length. Two-dimensional parameters and frequency of canal orifices were evaluated at 1, 2, and 3 mm levels from the apical foramen. The number of accessory canals, the dentinal thickness, and cross-sectional appearance of the canal at different root levels were also recorded. Expression of deep grooves was observed in 21.42% of the sample. Mean lengths of root and RG were 13.43 mm and 8.5 mm, respectively, while depth of the RG ranged from 0.75 to 1.13 mm. Mean canal volume, surface area and SMI were 10.78 mm3, 58.51 mm2, and 2.84, respectively. Apical delta was present in 4.35% of the sample and accessory canals were observed mostly at the middle and apical thirds. Two-dimensional parameters indicated an oval-shaped cross-sectional appearance of the root canal with a high percentage frequency of canal divisions (87.15%). Canal configuration type V (58.57%) was the most prevalent. C-shaped configuration was observed in 13 premolars (18.57%), whereas dentinal thickness ranged from 1.0 to 1.31 mm. Radicular grooves in mandibular first premolars was associated with the occurrence of several anatomical complexities, including C-shaped canals and divisions of the main root canal.

Resumo O objetivo deste estudo foi avaliar a morfologia de 70 pré-molares inferiores com depressões radiculares (DR) usando a microtomografia. Os dentes foram escaneados e avaliados quanto à morfologia das raízes e canais radiculares, bem como o comprimento, profundidade, frequência e localização das DR. O volume, a área de superfície e o Structure Model Index (SMI) dos canais foram mensurados no comprimento total da raiz. Parâmetros bidimensionais e orifícios do canal foram avaliados a 1, 2 e 3 mm do forame apical. O número de canais acessórios, a espessura dentinária e a aparência transversal do canal em diferentes níveis de raiz também foram registrados. A expressão de sulcos profundos foi observada em 21,42% da amostra. Os comprimentos médios de raiz e DR foram de 13,43 mm e 8,5 mm, respectivamente, enquanto a profundidade das DR variou de 0,75 a 1,13 mm. O volume médio do canal, a área superficial e o SMI foram de 10,78 mm3, 58,51 mm2 e 2,84, respectivamente. O delta apical estava presente em 4,35% da amostra e os canais acessórios foram observados principalmente nos terços médio e apical. Os parâmetros bidimensionais indicaram canais radiculares com secção oval e alta frequência de divisões canal principal (87,15%). A configuração Tipo V do canal radicular foi a mais prevalente (58,57%). A presença de canais em forma de C foi observada em 13 pré-molares (18,57%), enquanto a espessura dentinária variou de 1,0 a 1,31 mm. Os sulcos radiculares nos primeiros pré-molares inferiores foram associados à ocorrência de várias complexidades anatômicas, incluindo canais em forma de C e múltiplas divisões do canal principal.

Unusual Deviation of the Main Foramen from the Root Apex.

The relationship of the main foramen to the anatomic root apex has been the subject of several studies. Although they are anatomically close, they rarely coincide, and their distance can vary according to age or tooth type, ranging from 0.2 to 3.0 mm. The aim of this short communication was to evaluate the distance between the main foramen of independent middle mesial canals (MMCs) and the anatomical mesial root apex of mandibular first molars using the micro-computed tomography. Twenty-five mandibular first molars with MMCs were scanned (resolution of 9.9 µm), and the distance from its main foramen to the anatomical apex was evaluated. Overall, the distance ranged from 0.2 to 2.4 mm; however, in 3 specimens the distance was greater than 3 mm. This report demonstrates that the exit of the main foramen of the MMC varies considerably and could approach a substantial distance from the anatomical apex greater than previously reported in the literature.

Unusual Deviation of the Main Foramen from the Root Apex

Abstract The relationship of the main foramen to the anatomic root apex has been the subject of several studies. Although they are anatomically close, they rarely coincide, and their distance can vary according to age or tooth type, ranging from 0.2 to 3.0 mm. The aim of this short communication was to evaluate the distance between the main foramen of independent middle mesial canals (MMCs) and the anatomical mesial root apex of mandibular first molars using the micro-computed tomography. Twenty-five mandibular first molars with MMCs were scanned (resolution of 9.9 µm), and the distance from its main foramen to the anatomical apex was evaluated. Overall, the distance ranged from 0.2 to 2.4 mm; however, in 3 specimens the distance was greater than 3 mm. This report demonstrates that the exit of the main foramen of the MMC varies considerably and could approach a substantial distance from the anatomical apex greater than previously reported in the literature.

Resumo A relação do forame principal com o ápice anatômico da raiz tem sido objeto de vários estudos. Embora estejam anatomicamente próximos, eles raramente coincidem, e a sua distância pode variar de acordo com a idade ou o tipo de dente, oscilando entre 0,2 e 3,0 mm. O objetivo deste artigo é relatar que a saída foraminal do canal mediano (MMC), presente na raiz mesial de molares inferiores, pode apresentar variações significativas, atingindo distâncias acima de 3 mm do ápice anatômico. Vinte e cinco primeiros molares inferiores com MMC foram escaneados (resolução de 9,9 mm) e a distância do forame principal ao ápice anatômico avaliada. Em geral, a distância mostrou variações consideráveis; no entanto, em 3 espécimes esta distância ficou acima de 3 mm. Este estudo teve como objetivo relatar que a saída do forame principal de canais medianos de primeiros molares inferiores pode apresentar variações consideráveis, podendo atingir distâncias maiores do que as relatadas previamente na literatura.

Analysis of kinematic, kinetic and electromyographic patterns during root canal preparation with rotary and manual instruments.

OBJECTIVE: This study assessed the muscular activity during root canal preparation through kinematics, kinetics, and electromyography (EMG). MATERIAL AND METHODS: The operators prepared one canal with RaCe rotary instruments and another with Flexo-files. The kinematics of the major joints was reconstructed using an optoelectronic system and electromyographic responses of the flexor carpi radialis, extensor carpi radialis, brachioradialis, biceps brachii, triceps brachii, middle deltoid, and upper trapezius were recorded. The joint torques of the shoulder, elbow and wrist were calculated using inverse dynamics. In the kinematic analysis, angular movements of the wrist and elbow were classified as low risk factors for work-related musculoskeletal disorders. With respect to the shoulder, the classification was medium-risk. RESULTS: There was no significant difference revealed by the kinetic reports. The EMG results showed that for the middle deltoid and upper trapezius the rotary instrumentation elicited higher values. The flexor carpi radialis and extensor carpi radialis, as well as the brachioradialis showed a higher value with the manual method. CONCLUSION: The muscular recruitment for accomplishment of articular movements for root canal preparation with either the rotary or manual techniques is distinct. Nevertheless, the rotary instrument presented less difficulty in the generation of the joint torque in each articulation, thus, presenting a greater uniformity of joint torques.

Effect of different restorative procedures on the fracture resistance of teeth submitted to internal bleaching.

The aim of this study was to evaluate the influence of different restorative procedures on the fracture resistance of endodontically treated teeth submitted to intracoronal bleaching. Fifty upper central incisors were distributed into 5 groups: GI - healthy teeth; GII - endodontically treated teeth sealed with Coltosol; GIII - endodontically treated teeth bleached and sealed with Coltosol; GIV - endodontically treated teeth bleached and restored with composite resin; and GV - endodontically treated teeth bleached and restored with a fiberglass post and composite resin. In the bleached specimens, a cervical seal was made prior to bleaching with 38% hydrogen peroxide. The gel was applied on the buccal surface and in the pulp chamber, and was then light-activated for 45 s. This procedure was repeated three times per session for four sessions, and each group was submitted to the restorative procedures described above. The specimens were submitted to fracture resistance testing in a universal testing machine. There were statistically significant differences among the groups (p < 0.05). The mean value found for GIII was the lowest (0.32 kN) and was significantly different from the values found for GI (0.75 kN), GII (0.67 kN), GIV (0.70 kN), and GV (0.72 kN), which were not significantly different from each other (p > 0.05). The restorative procedures using composite resin were found to successfully restore the fracture resistance of endodontically treated and bleached teeth.